Third Party Peripherals

From Hoggit: DCS World Multiplayer
Jump to: navigation, search

Contents


[edit] Head Trackers

Headtrackers are optional however after using them many players would rather fly with a crap stick than give theirs up. There are multiple options when it comes to head tracking ranging from commercial solution to open source software that uses only a webcam and a view of your face.

[edit] TrackIR by Natural Point

TrackIR by Natural Point

TrackIR is a commercial solution by Natural Point Inc. It is the most costly of all the head tracking options but is also completely plug and play. Performance is the best across the board, however you will pay for these advantages.

[edit] FreeTrack

FreeTrack is an open source head tracking application using off the shelf hardware. It performs equally as well as TrackIR when properly configured for a fraction of the cost. However, assembly of the LED model requires soldering/electronics skills and the initial configuration can be time consuming. Additionally, a webcam must be permanently modified by removing its internal IR filter, and should be factored into cost. Overall FreeTrack is a cheaper "Do It Yourself" alternative to TrackIR.

A Freetrack IR hat build


See our guide for Building a Freetrack Rig.

[edit] FaceTrackNOIR

FaceTrackNOIR is an open source software solution using off the shelf hardware. But instead of tracking a cap with 3 known points it uses facial recognition to follow the players face. This method has the lowest cost of entry however it is the least accurate and some users have issues getting it to work. Your mileage may vary.

[edit] FaceTrackNOIR PointTracker

FTNoIR PointTracker is an open source addition to the FaceTrackNOIR system. Instead of using facial recognition, this plugin uses 3 point tracking similar to FreeTrack. FTNoIR PointTracker was developed as a stable alternative to FreeTrack which has stability issues on some newer systems and is no longer actively developed.

Configuring FTNoIR PointTracker

[edit] Joysticks and throttles

The Thrustmaster HOTAS WARTHOG Joystick

[edit] Thrustmaster HOTAS Warthog

The Thrustmaster HOTAS Warthog is the premiere HOTAS joystick and throttle for DCS: A10. It was modeled from the real stick and throttle from the A10C and is constructed from metal weighing in at 14 pounds. You can expect to pay between $450 to $500 USD for one new making it one of the most expensive peripherals out however it is a quality piece of hardware. Used Warthogs can be found for around $350 to $400 however they sell quickly.

[edit] Saitek X52 and X52 Pro

The middle of the road joysticks and the most recommended by players. The non Pro variant can be obtained for about $100 new with the Pro version clocking in at around $130. The Pro is constructed from better materials and is the currently manufactured model. For players on a budget it is recommended to find one of these used either locally, on eBay, or through the Amazon Used listings. Profiles are widely available that closely reproduce the control scheme of the real joystick.

You can find a profile thanks to Iron [here]; details for each aircraft with his profile can be found here. Note: This is a DCS: World profile, do not try to apply the configuration to DCS: A10 v1.1.1.1.

[edit] Rudder Pedals

Saitek Pro Flight Rudder Pedals

Depending on who you talk to rudder pedals are completely optional. However if you buy a joystick that does not have a twist axis for rudder control you will need a pair for control.

[edit] Saitek Pro Flight Rudder Pedals

These are generally well reviewed and come in at around $100 USD from many online retailers. They are an all plastic construction and connect via USB.

[edit] Saitek PRO Flight Combat Rudder Pedals

These are similar to the above but better constructed with metal instead of plastic. They do however run a fair bit more at around $170 USD.

[edit] CH PRODUCTS Pro Pedals

These pedals are also well reviewed and may be better constructed than the Saitek Pro Flight pedals. They also run around $100 USD.

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox